The Keurig water reservoir is an integral part of the coffee maker. It holds water in the tank and feeds it through to the machine. When it breaks, it can affect how your coffee tastes and how much of it you get from one brew to another. If you have a Keurig, you will want to replace your water reservoir as soon as possible. You can do this yourself or take your coffee maker to a repair shop if you are not sure how to go about it.
Keurig Water Reservoir Replacement
The original Keurig water reservoir is made of plastic, which can break and leak with time. The Keurig replacement parts include a new reservoir and lid, and the parts are good for all Keurig models. This is a great deal because it’s cheaper than buying a new Keurig machine!
The water reservoir is a crucial component of the Keurig coffee maker. It provides the water that is needed for brewing different types of coffee. The reservoir is also known as the tank and it is located under the brewer. When you turn on your Keurig coffee maker, it will automatically fill up with water from the reservoir and then start brewing coffee.
If you want to make sure that your Keurig brewer continues to give you great tasting coffee every time, then you need to replace the water reservoir at least once or twice per year. You should also replace it if there are any leaks in your brewer, even if they are small and not causing any damage or mess on your countertop.
When Should You Change Your Water Reservoir?
You should change your water reservoir whenever there are signs of wear and tear or when there are leaks in it. If you see any cracks in the plastic or if there is any corrosion around the spout of the reservoir, then it’s time for a replacement. Leaks can cause damage to your countertop as well as other parts inside your Keurig machine.
Keurig Water Reservoir
Your Keurig is a great machine for brewing one cup at a time. It makes a great cup of coffee, but unfortunately, there are some problems that may occur with it over time. One of these issues involves the water reservoir. The water reservoir is an important part of your Keurig because it holds the water that you will use to brew your drink. If there is an issue with this part, then you will have to replace it as soon as possible so that you can continue using your machine without any problems.
Water Reservoir Replacement
If you’ve used your Keurig coffee maker daily for a couple of years, then it’s time to replace the water reservoir. This part is made of plastic and can crack after some time. If this happens, you will need to purchase a replacement water reservoir. Replacement water reservoirs are available at many retailers or online stores such as Amazon. They’re easy to install and should only take a few minutes.
The following steps will help you replace your old water reservoir with a new one:
- Turn off your coffee maker and unplug it from its power source.
- Remove any K-Cups from the holder and remove any drip trays from the top of the unit if they have been installed previously.
- Locate the screw at the bottom of the unit and remove it with your Phillips screwdriver so that you can access the inside of your Keurig coffee maker’s housing unit.
- Set aside the parts that were removed from inside your Keurig machine’s housing unit during step number two above so that they do not get lost or damaged while replacing your old water reservoir with a new one (some are labeled with numbers so they can easily be identified).
How to Replace Your Water Reservoir?
Replacing the water reservoir in your Keurig is very easy and simple if you know how to do it right and if you have all the right tools on hand at home so that you can get started right away without having to run around looking for replacement parts or trying to figure out how they work together.
The first thing that you will need to do is remove the old reservoir from the machine by taking out two screws from each side of it and then pulling it outwards until it comes off easily from its base plate. Once this has been done, make sure that all of its contents are removed inside.
How Do You Know if Your Water Reservoir is Broken?
There are several signs that indicate that your water reservoir needs replacing:
Your coffee tastes like plastic or rubber. Your coffee does not taste as it should. It may taste metallic or like plastic, depending on which type of plastic was used in manufacturing the reservoir. The flavor will vary depending on what kind of plastic was used and where in the machine it was placed when manufactured. This problem can occur even if you use filtered water or bottled water because some plastics leach chemicals into liquids over time, regardless of whether they are natural or synthetic types of plastic.
You have no idea how much water is left in the tank at any given time; this means that there is no way for you