This article discusses how to fix your Keurig mini brew button, which is not working or not producing any hot water. Keurig is a brand of single-serve coffee machines and brewers that use pods – small paper cups containing ground coffee, often flavored by extracts.
If you have more problems for the Keurig mini, check its troubleshooting post.
Keurig Mini brewer is popular for its ease of use and small size. But one downside to the mini brewer is that the brew button sometimes stops working. This can be caused by the follower reasons. Fixing this issue may require you to purchase a new button kit.
- Insufficient water level: Make sure the water level in the reservoir is above the minimum fill line. If it’s too low, the machine may not brew properly.
- Clogged needle: Over time, coffee grinds and other debris can accumulate in the needle that punctures the K-Cup, which can cause blockages and prevent the machine from brewing. Clean the needle with a paper clip or needle to remove any buildup.
- Mineral buildup: Hard water with high mineral content can cause mineral buildup in your Keurig, which can affect the machine’s performance. Descale the machine to remove any buildup.
- Machine needs to be reset: Resetting the machine can sometimes resolve minor issues. Unplug the machine, wait a few minutes, and plug it back in.
- Defective machine: If none of the above solutions work, there may be a defect in the machine. Contact Keurig customer support for assistance or consider replacing the machine.
Here are instructions on how to fix a not working button on a Keurig mini machine:
- Inspect the water level: Check the water level in the reservoir and make sure it is above the minimum fill line. If it’s too low, the machine may not brew properly. Refill the reservoir if necessary.
- Clean the needle: Over time, coffee grinds and other debris can accumulate in the needle that punctures the K-Cup, which can cause blockages and prevent the machine from brewing. To clean the needle, unplug the machine and remove the K-Cup holder. Use a paper clip or needle to clean out the needle and remove any buildup.
- Descale the machine: Hard water with high mineral content can cause mineral buildup in your Keurig, which can affect the machine’s performance. To descale the machine, follow the instructions in the user manual or use a descaling solution specifically designed for Keurig machines.
- Reset the machine: Resetting the machine can sometimes resolve minor issues. To reset your Keurig mini, unplug it from the power source, wait a few minutes, and then plug it back in.
- Contact Keurig customer support: If none of the above solutions work, there may be a defect in the machine. Contact Keurig customer support for assistance or consider replacing the machine.
By following these instructions, you can resolve the issue with your Keurig mini brew button not working.
The Keurig mini brew button is a small, sensitive button that occasionally malfunctions. The life expectancy of a Keurig mini brew button depends on a variety of factors, including how often the button is used and how well it is taken care of. However, in general speaking, a Keurig mini brew button should last around 2–3 years with regular use.
A Keurig mini typically has two buttons: a power button and a brew button. The power button is used to turn the machine on and off, while the brew button is used to initiate the brewing process.
If the buttons on your Keurig mini are not working, there are a few potential causes and solutions you can try:
- Power issue: Make sure the machine is properly plugged in and that the outlet is working. Try unplugging the machine and plugging it back in to reset it.
- Button malfunction: If one or both of the buttons are not responding, there may be a problem with the buttons themselves. Try cleaning the buttons with a soft, damp cloth to remove any debris or residue.
- Defective machine: If the buttons are still not working, there may be a defect in the machine. Contact Keurig customer support for assistance or consider replacing the machine.
If the issue persists, you may want to contact Keurig customer support or take the machine to a professional for repair.
Other troubleshooting of Keurig mini
Low water level: You can check the water level by opening your Keurig’s lid and looking at the water reservoir. If it’s low, you’ll see some brownish water in there. The first thing to do is to add more water — but don’t worry if you don’t have any in there yet! You can also use cold tap water or distilled water as an alternative.
Faulty pump: This is a rare problem, but if you’re having trouble brewing coffee, check that the pump isn’t broken. If it is, we recommend contacting customer service for help — they can replace the pump for you with no fuss!
Loss of power: This is one of the most common issues with any Keurig mini model. The power button may be stuck or not working properly, which means that the machine will not turn on at all. You can try resetting it by unplugging it for about three seconds and then plugging it back in again. If this does not work, you should try replacing the battery or bypassing it altogether by connecting an electrical outlet directly into your machine. If none of these options work, then you might want to contact customer service for further help.
Faulty brew button (also known as K-cup selector): If you’re trying to brew coffee with a K-cup but nothing happens when you press down on the button, there could be several reasons for this: The button might not be working properly; there might be something blocking its movement; or it could even be broken altogether.
The Water Reservoir Is Empty: When the water reservoir is empty, your coffee will not brew. This is because there isn’t any water in the reservoir.
You need to fill up the reservoir so that it can work properly. To do this, turn on your Keurig machine and fill up the reservoir with water. You will see a “fill water” light flash when it is done filling up completely with water.
If you see this light flashing constantly on your Keurig mini brewer, then try turning off your machine and unplugging it from power for about 30 seconds before turning it back on again.
The water leaks out when brewing coffee: This usually happens when you try to brew coffee in a container other than the one provided by Keurig. When using a different type of container, you should make sure to switch over to the correct spout for your model before brewing. If this does not work, you should contact customer service for help with this problem.
Tips for Avoiding Brew Button Malfunction
Following the User Manual Guidelines
- Read the user manual carefully before using the Keurig Mini Brewer.
- Avoid overfilling the water reservoir above the maximum fill line as it can cause a malfunction of the brew button.
- Ensure that the machine is plugged into a grounded electrical outlet and switched on before pressing the brew button.
- Do not use the brewer to dispense any other liquids apart from coffee and hot water.
Using Clean and Filtered Water
- Use clean and fresh water to avoid clogging of the machine’s internal system.
- Regularly clean the water reservoir and detachable parts and follow the manufacturer’s instructions on cleaning the machine’s internal mechanisms.
- Use filtered water if possible to prevent minerals from building upon the machine’s internal plumbing and affecting the function of the brew button.
Regularly Checking the Coffee Maker for Defects:
- Perform a regular check of the machine’s parts and electrical wiring to ensure that there are no loose connections or broken wires that could affect the functioning of the brew button.
- Look out for any cracks or damage on the machine’s exterior which could lead to water leakage and affect the brew button’s function.
- It is recommended to contact Keurig customer service if the problem persists after checking the machine for defects.
Summary
The Keurig Mini Plus Brewing System is not without its shortcomings, and frequent users of this coffee maker tend to list a persistent problem among the list of negatives – the aforementioned brew button doesn’t always work without a little assistance.